Urbanears Active Hellas Guide De L'utilisateur page 3

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 6
HELLAS USER MANUAL
CONNECTING TO A BLUETOOTH® ENABLED SOUND SOURCE
Follow the steps below when pairing your headphones with your sound source (smartphone, tablet or computer) for the first time.
1. If the device is turned off: Keep holding the touch interface for 4 seconds.
2. Select and connect to HELLAS on your sound source, according to its user manual.
After the initial pairing, the two devices will auto-connect when they are switched on and within the range of 10 meters.
CONTROLS
PLAY/PAUSE/
ANSWER CALL
Single tap
PREVIOUS SONG
Swipe backward
CHARGING
Plug the headphones into a USB power source using the micro USB cable. The USB cable can only be used for charging. 2 hours
charge gives approximately 14 hours of playback at medium volume.
Charge the battery before using the headphones for the first time.
HANG UP/
REJECT CALL
Double tap
NEXT SONG
Swipe forward
DECREASE
VOLUME
Swipe downward
INCREASE
VOLUME
Swipe upward
ENG

Publicité

Table des Matières
loading

Produits Connexes pour Urbanears Active Hellas

Table des Matières