Interfaces; Using The Headphones - Urbanears Active Hellas Guide De L'utilisateur

HELLAS USER MANUAL

INTERFACES

Machine washable headband and ear cushions
1
LED indicator – Discrete and unlit during normal
2
operation.
3
Built-in touch interface (right side)
Micro USB connector for charging the battery
4

USING THE HEADPHONES

Locate the Touch Interface on the right ear cup. All user interfac-
es are done through commands on the touch interface. An audio
signal indicates when a command is activated.
5
1
2
Reflective cord
5
6 Microphone for answering phone calls
TURN THE HEADPHONES ON/OFF
Power On: Press and hold the touch interface for
4 seconds Power Off: Press and hold the touch
interface for 4 seconds.
Note! The headphones will auto shut-off if
inactive and disconnected for 10 minutes.
ENG
6
4
3