Audizio 102.236 Guide De Démarrage Rapide page 2

Remove the tuner from the package box.
Plug in the DC adapter and switch the <Power on/off> switch (on the rear panel) to "ON". Press <Standby> (on the front
panel) to power on the device.
Caution: Only use the supplied adapter to power the device. Using a power supply with a different rating can cause
permanent damage to the device and may be hazardous.
The tuner is intended to be connected with external powered speakers. It does not have a built-in amplifier and speakers
driver. Please connect your stereo through the analogue- or digital outputs, located on the rear panel.
An internet connection can be setup via wired LAN or wireless LAN (WiFi).
view the full manual at www.audizio.com for a comprehensive explanation
When in the main menu, select "Internet Radio" and you will find the below options:
Skytune
Select Skytune to start enjoying radio stations from all over the world. You can filter your search by, for example, region and
genre. The Local Radio lets you quickly access available stations in your region through internet connection.
Note: you can set the local radio area under Configuration>Local radio setup.
Start playing internet radio
When a radio station is playing, additional radio information can be displayed. Press the <Cursor right> on the remote when
in state of play.
Preset a station
The preset can be done also by "Press and hold" the Tune/Select knob.. When a station is playing, press the <Set to
preset/favourite> button on the remote control. The preset icon will appear on the display and the station is added to the
favourite list.
Recall a station
Press the <Recall presets/favourites> button on the remote control to recall the list of presets, or navigate to My Favourite
on the main menu and select it to confirm.
Note: view the full manual at www.audizio.com for a comprehensive explanation
If there is Digital Audio Broadcasting (DAB) in your area, the device can pick up the DAB stations (no internet connection is
required). The device supports both DAB and DAB+. Connect the supplied wire antenna to the antenna connector on the rear
cabinet. Place the radio close to the window and extend the antenna as far as it can go to get the best reception.
On the main menu, scroll to DAB Radio or use the <Mode> button on remote to switch to DAB Radio. Press <OK> to start. It
will ask whether you want to Scan DAB Station. Press <OK> to start scanning and it will show the progress on the number of
channels received. When it is done, a preset page will be displayed.
You can select a station and start listening to it. Whenever you want to add the station to My Favourite, press the <Set to
preset/favourite> button and the station will be added to the favourite list.
Press the <Cursor left> button (or <Back> on the device) to return to the Preset list.
2