Perel Tools CSOL06 Notice D'emploi page 5

b. The Battery
It is recommended to charge the battery for 1 or 2 days in direct
sunlight before the first use. This will increase battery life
expectancy.
1. Switch off the device [1] before (re)placing batteries.
2. Loosen the screws at the back of the device [2] and remove the
covers.
3. Place a new battery of the correct size and type in the device.
Respect the polarity!
4. Replace the covers and fix them by tightening the screws.
c. Mounting on the Wall
Fix a screw into the wall and let it protrude at least 5mm. Hang the
lamp unit on the screw [3].
6. Cleaning and Maintenance
Keep the solar panel [4] clean to optimise performance.
It is recommended to change the battery once per year.
7. Technical Specifications
solar panel
light source
light colour
rechargeable
battery
operating time
dimensions
weight
Use this device with original accessories only. Velleman nv
cannot be held responsible in the event of damage or injury
resulted from (incorrect) use of this device. For more info
concerning this product and the latest version of this manual,
please visit our website www.perel.eu. The information in this
manual is subject to change without prior notice.
V. 01 – 27/03/2012
CSOL06
4V / 82.5mA
2 LEDs: 0.3W - 12,000mcd (lower, main part),
0.07W - 2000mcd (front and side strips)
white
1x 3.2V Li-Battery (LiFePo4), 500mAh
6~8h when fully charged
78 x 170 x 50mm
±230g
5 ©Velleman nv