Ninja BL688 Série Guide D'utilisation page 12

Assembly and Use of the Pitcher - cont.
USE
Fig. 7
10 Review warning and caution statements on page 10
before proceeding.
NOTE: Ninja
Blender 1200 with AUTO-iQ
®
can sense which jar is on the motor base. The function
lights will illuminate depending on which jar is placed
on the motor base. (Fig. 6)
11 Press the power button to turn on the unit. Select
the speed or AUTO-iQ Program that best suits your
needs. The AUTO-iQ program will stop the appliance
automatically at the end of the program. (Fig. 7)
12 To pause the appliance, press the selected speed or
AUTO-iQ Program a second time. When the program is
paused, the light on the program button will flash until
you press it again to resume the rest of the program.
13 When you have reached your desired consistency, stop
the appliance by pressing the power button ( ) and
wait for the Stacked Blade Assembly to stop turning.
(Fig. 7)
11 1-877-646-5288
Fig. 6
Fig. 8
Technology
™
REMOVAL
Fig. 9
14 Turn the pitcher counter clockwise to remove and then
lift off the base. (Fig. 8)
WARNING: Never insert your hands in the pitcher
as the Stacked Blade Assembly is sharp. Always
use a spatula to dislodge food that has stuck to
the sides of the pitcher.
15 Open the pour spout cap and use the spout to empty
liquid contents.
16 For thicker consistencies, first remove the lid by
pressing the release button and pulling the lid handle
up to a 90 degree angle to lift lid off the pitcher. Then,
carefully remove the Stacked Blade Assembly by the
top of the shaft. Place the Stacked Blade Assembly
away from the work area to avoid accidental contact.
Finally, empty contents from the pitcher. (Fig. 9)
17 Make sure that the unit is unplugged when not in use.
18 To release the motor base from the counter or table top,
place your hands underneath both sides of the motor
base and gently pull the unit up and towards you.
(Fig. 10)
Fig. 10