RIDGID SeeSnake nanoReel Guide De Démarrage Rapide page 2

SeeSnake nanoReel Quick Start Guide
Read the safety information in the beginning of the nanoReel Operator's Manual
carefully before using the nanoReel. Failure to understand and follow the contents
of the safety sections may result in electrical shock, fire, property damage, and/or
serious personal injury.
This nanoReel Quick Start Guide provides an overview of function and operation. For
more details, see the Operator's Manual that accompanies the nanoReel.
nanoReel Components
Push Cable Guide
Front Case
Camera Clip
Camera Head Routing
1. Set the unit on a level surface and lay it on its back.
2. Unfasten the case latches on either side of the nanoReel.
3. Open the front case and route the camera head out through the push cable guide
in the front of the case.
4. Secure the camera head in the provided clip.
5. Close and relatch the case.
2 – English
!
System Cable for
SeeSnake CCU
Camera Head
WARNING!
micro CA-300
Camera Monitor
Case Latch
Feet
micro CA-300
Connector Plug
System Cable
for micro
CA-300
Cord Wrap
Rear Case
Slip-Ring
Module