Receiver Features; Front Panel - Alesis MicLink Wireless Guide D'utilisation

Transmitter Features
1. MicLink Power Switch – Adjust this switch to turn the
transmitter on/off.
2. Pairing LED – Blinks slowly when searching for the receiver.
Blinks rapidly when pairing to the receiver. Lights up solid
when paired to the receiver.
3. Mic Release – Press this clip to secure or release your mic
with the transmitter.
4. Mini USB Port – Connect the included Mini USB cable to
charge the transmitter.
5. Charging LED – Illuminates red when the transmitter is being
charged. Illuminates green when the transmitter is finished
charging.
6. Pair Button – Hold this button for 3 seconds to connect the
transmitter with the receiver.

Receiver Features

Front Panel

1. Pair Button – Press this button to
connect to the transmitter. The Pair
LED will illuminate when connected to
the transmitter.
2. Pair LED – Blinks slowly when
searching for the transmitter. Blinks
rapidly when pairing to the transmitter.
Lights up solid when paired to the transmitter.
3. Power LED – Illuminates when the receiver is powered on.
4. Volume – Adjusts the volume of the signal going to the Output.
5. Output – Use a standard 1/4" cable (not included) to connect the MicLink Wireless receiver to
your mixer or powered speaker.
1
2
2
3
4
1
4
3
1
5
6
2
5
3
4
5
6