XPower BENKA 2,60M Notice De Montage Et D'utilisation page 3

THANK YOU for your purchase of the high-performance sailplane BENKA !
We made a main effort while drawing and building this electro sailplane so that it is the best model you ever built and fly.
We provide you a kit with the highest quality and the best possible performances.
We wish you a great success while assembling and flying your new Benka.
Benka is the perfect example of a polyvalent and high performance sailplane, able to fly on any flight-site, and in every kind of
weather conditions. Il is excellent for thermal flying, and will fly on slope fileds as soon as a gentle breeze rises. Very efficient, it may
fly over long distances with a small loss of altitude. Capable of high speed, it can fly by strong wind. The wing with flaps and ailerons
can handle every situations, and the butterfly function makes landings a piece of cake. Its size makes it easy to transport and large
enough to be visible by far, so you can explore all the area easily.
Benka's key features
Strong sheeted foam wings.
●
The glass fiber fuselage is factory pre-drilled so the wings and stab fits perfectly.
●
Stab is removable for easy transportation and storage.
●
A brushless motor (to be purchased separatly) allows flying without any tug plane, and for slope flying, provides a great safety.
●
And of course... the model is delivered fully assembled and covered, you just have to make final assembly, install the radio system
●
and the motor.
With the Benka, you have an all-purpose model to fly on flat fields or on slopes, for thermal flying, or for aerobatics, depending of
you wishes. It is easy to carry, to store, and his exclusive color scheme ensure a high visibility.
Additional informations :
The suggested motor set ensure fast climb rate, but also a long run time.
●
Flaps allow you to change the wing section and to adapt to all situations.
●
Butterfly makes landings easy.
●
The glassfiber fuselage is reinforced with carbon fiber.
●
IMPORTANT :
Please take a few moments to read this instruction manual before beginning assembly. Do an inventory of the parts using the parts
list, to control that there is no lack or imperfection.
Thank you to contact TOPMODEL immediately, if you note a missing part or a damaged part.
WARRANTY :
It is important to notify to TOPMODEL all damage or problems with this model within 7 days following the reception of the kit to be able
to benefit the warranty. In the event of return of the model, the customer is responsible for transport and return shipping cost is at his
expenses. In the event of defect, the part will be exchanged or replaced once this one will be delivered to TOPMODEL for expertise
(transport on your cost). In the event of problem, do not hesitate to contact TOPMODEL.
TOPMODEL cannot control the dexterity of the modeler and cannot influence the builder during the assembly or the use of this
radiocontrolled model, thus TOPMODEL will in no way accept or assume responsability or liability for damages resulting from the use
of this user assembled product.
The purchaser/user accepts all the responsibilities in the event of structural or
To assemble this kit, you'll need the items listed below:
● ADHESIVE :
Cyanoacrylate thin and thick, epoxy 30' and 5' adhesives.
● TOOLS :
Knife (X-acto), Phillips screw driver (small and medium), needle tip pliers, pliers, scissors, scotch tape, masking tape, double
sticking tape, drill (bits all size set), sanding paper, ruler, ball point pen, clips, alcohol, soldering iron, piece of cloth or rags, etc.
REMINDER
We take great care to delivering the best possible quality.
We kindly remind you that these models are not ready to fly and that the remaining work is an important part to get the
model flying. For this, please, check all glue joints and assemblies.
Safety first !
We thank you for your attention during the assembly of our kits, and wish you good and numerous flights !
mechanical problems.
TO ASSEMBLE THIS KIT
Notice XPower - Page 3 - Benka
TOPMODEL SAS