Domo DO8133 Mode D'emploi page 34

DO8133
4. Fasten tightly using the hook on the right-angle bolt.
B. Attach the fan to the inner column using the mounting brackets and the included
nuts, rings and bolts.
USE
Adjust the desired speed by turning the knob:
0 = stop
1 = low
2 = medium
3 = high
Tip the fan up or down for desired position by carefully pushing on the safety guard.
MAINTENANCE
Remove the plug from the socket.
Make sure water or other liquids never come into contact with the motor housing or
other electrical parts.
Always use a damp cloth with a non-abrasive soap solution.
Do not use paint thinner, petrol, etc, to clean the fan.
Cleaning the fan blade or the safety guard grill:
• Remove the fastening bolt at the bottom of the grill.
• Open all of the grill fasteners.
• Remove the knob.
• Remove the safety guard grill.
Clean the fan blades with a soft cloth dampened with a non-abrasive soap solution.
Take great care near the motor housing.
Make sure that no electrical part comes into contact with water. Put the safety guard,
the knob and the fastening bolt back.
The fan is for use solely indoors on the ground.
34