Bosch GST 135 CE PROFESSIONAL Instructions D'emploi page 12

Tool Specifications
Jigsaw
Order number
Jigsaw
Order number
Rated input power* [W]
Output power
Stroke rate
at no load
Stroke
Stroke rate
preselection
Constant electronic
control
Cutting capacity,
max.
Wood
Aluminium
in non-alloy steel
Bevel cuts
(left/right)
Weight without
cable, approx.
Protection class
Please observe the order number of your machine.
The trade names of the individual machines may vary.
* The values given are valid for nominal voltages [U]
of 230/240 V. For lower voltages and models for specific
countries, these values can vary.
Noise/Vibration Information
Measured values determined according to
EN 60 745.
Typically the A-weighted sound pressure level of
the machine is 84 dB (A). Measurement uncer-
tainty K=3 dB.
When working, the noise level can exceed
85 dB (A).
Wear hearing protection!
The typical hand/arm vibration is below 2.5 m/s
Intended Use
The machine is intended for making separating
cuts and cut-outs in wood, plastic, metal, ceramic
plates and rubber while resting firmly on the
workpiece. It is suitable for straight and curved
cuts with mitre angles to 45°. The saw blade rec-
ommendations are to be observed.
12 • 2 609 932 280 • 04.03
GST 135 BCE
PROFESSIONAL
0 601 511 7..
GST 135 CE
PROFESSIONAL
0 601 510 7..
720
[W] 310
[spm] 500 – 2 800
[mm] 26
●
●
[mm] 135
[mm] 20
[mm] 10
[°] 0 – 45
[kg] 2.7
/ II
Machine Elements
The numbering of the machine elements refers to
the representation of the machine on the graph-
ics page.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
1 Vibration damper
2 Lock-on button for On/Off switch
(GST 135 BCE)
3 On/Off switch
4 Stroke rate preselection thumbwheel
5 Vacuum hose*
6 Vacuum connection*
7 Base plate with mit interior extraction
channel
8 Sliding shoe for base plate*
9 Switch for sawdust blowing device
10 Lever for adjustment of pendulum action
11 Pushbutton for Precision Control
12 Stroke rod
13 Guide roller
14 Precision Control guide
15 Saw blade*
16 Contact protector
17 Dust cover for vacuuming*
18 SDS clamping lever for saw blade release
19 Scale for mitre angle
20 Angle gauge**
21 Thumbwheel for pre-tension of base plate
22 SDS lever for base-plate adjustment
23 Splinter guard
24 Circle cutter/parallel guide*
* Not all of the accessories illustrated or described are
included as standard delivery.
** Commercially available (not included in the delivered
items)
2
.
general safety notes in the enclosed booklet
must be observed. Before using for the first
time, ask for a practical demonstration.
English - 1
For Your Safety
Working safely with this ma-
chine is possible only when the
operating and safety information
are read completely and the in-
structions contained therein are
strictly followed. In addition, the