Placement Of The Outside Temperature Transmitter - BASETech WS-9750-IT Mode D'emploi

In addition, mount all units in locations where they are sufficiently protected against dampness
and rain.
Free-standing installation
With the help of its stand that can be fastened, the station can be installed on any flat surface.
Wall mounting
Choose a protected mounting location. Avoid direct rain or sunlight.
1. When mounting on a wall, remove the stand from the station
by unfastening.
2. Screw a suitable screw into the wall at the desired mounting
location and let the head stick out about 5 mm from the wall.
3. Hang the station on the screw. Make sure that the unit
engages securely on the screw head before letting go of it.
b) Placement of the outside temperature
transmitter
The bracket can be fixed at both ends of the
outside transmitter so that it can be mounted
on any flat surface.
The bracket can be mounted on a wall by
means of two screws provided.
1. For this, fasten the bracket with the help of
screws and dowels at the desired spot on
a vertical surface.
2. Fasten the outside transmitter into the
bracket.
31