EN
THE VARIOUS FUNCTION AND POSSIBILITIES
60
Light Cancelling Mode
When would it be used?
• If you want to cancel lights of cooler, you can select this
mode.
• Press on Freezer (F) and Cooler (R) buttons simultaneously,
and open and close the cooler door 3 times. The mode will
be selected in this way. From now on, the lights will not
come on when freezer and cooler doors are opened.
• If you want to cancel this mode, repeat the same process
or the mode will automatically cancel itself after 24 hours.
Screen Saver Mode
• This mode can be selected for energy saving.
• Press D.COOL button for 3 seconds continously.
• After 3 seconds, the mode will be set and sound as beep
beep.
• During screen saver mode, the lighting of display will be
off.
• When we open door or press any button, the lighting of
display will be on for 5 seconds, then it will be off again.
• Press D.COOL button for 3 seconds for cancelling this
mode.
Cooler Temperature Settings
• Initial temperature value for the Cooler Indicator is +4°C.
• Press cooler (R) button once.
• When you first push this button, +2°C appears on the
setting indicator of the cooler.
• Whenever you press on this button, one bar comes on
cooler bar graphic indicator and lower temperature will be
set. (+8°C, +6°C, 5°C, +4°C, +2°C)
• When you push the cooler button until +2°C (maximum
cold) appears on the cooler setting indicator, and when
you keep pushing, letters SC (Super Cool) will flash.
• If you continue to press, it will restart from +8°C.
• The temperature value selected before Holiday Mode,
Super Freeze Mode, Super Cool Mode or Economical
Mode is activated will remain the same when the mode is