VONROC GG501AC Traduction De La Notice Originale page 4

EN
TECHNICAL SPECIFICATIONS
Model No.
Voltage
Frequency
Power input
Diameter glue stick
Weight
DESCRIPTION
Fig. A
1. Trigger
2. Stand
3. Nozzle
4. Thermal protection for nozzle
3. OPERATION
1. Fold out the stand (2). Put down the appliance.
2. Insert a glue stick into the glue gun via the
opening at the rear.
3. Insert the mains plug into the socket to turn the
glue gun on. Wait 3-5 minutes for the glue gun
to heat up.
4. Press the trigger (1) to release the glue. The
amount of pressure needed can be determined
by practical testing. Replace the glue cartridge
as soon as you notice little if any glue is released
from the gun.
5. Rest the gun on the support stand (2) between
individual gluing runs.
6. Remove the mains plug from the socket if you
do not intend to use it for some time.
4. MAINTENANCE
Before cleaning and maintenance, always
switch off the machine and remove the
mains plug from the mains.
Clean the machine casings regularly with a soft
cloth, preferably after each use. Make sure that
the ventilation openings are free of dust and dirt.
Remove very persistent dirt using a soft cloth mois-
tened with soapsuds. Do not use any solvents such
as gasoline, alcohol, ammonia, etc. Chemicals such
as these will damage the synthetic components.
4
GG501AC
220-240V ~
50 Hz
25W (70W max.)
11.2 mm
ca. 0.24 kg
ENVIRONMENT
Faulty and/or discarded electrical or
electronic apparatus have to be collected at
the appropriate recycling locations.
Only for EC countries
Do not dispose of power tools into domestic waste.
According to the European Guideline 2012/19/
EC for Waste Electrical and Electronic Equipment
and its implementation into national right, power
tools that are no longer usable must be collected
separately and disposed of in an environmentally
friendly way.
WARRANTY
VONROC products are developed to the highest
quality standards and are guaranteed free of
defects in both materials and workmanship for the
period lawfully stipulated starting from the date of
original purchase. Should the product develop any
failure during this period due to defective material
and/or workmanship then contact VONROC directly.
The following circumstances are excluded from this
guarantee:
• Repairs and or alterations have been made
or attempted to the machine by unauthorized
service centers;
• Normal wear and tear;
• The tool has been abused, misused or
improperly maintained;
• Non-original spare parts have been used.
This constitutes the sole warranty made by compa-
ny either expressed or implied. There are no other
warranties expressed or implied which extend
beyond the face hereof, herein, including the
implied warranties of merchantability and fitness
for a particular purpose. In no event shall VONROC
be liable for any incidental or consequential dam-
ages. The dealers remedies shall be limited to
repair or replacement of nonconforming units or
parts.
The product and the user manual are subject to
change. Specifications can be changed without
further notice.
WWW.VONROC.COM