Source Menu; Pc Mode Menu System; Pc Position Menu - Schaub Lorenz 32LT33 Mode D'emploi

Name
To change the name of a programme, select the
programme and press the RED button.
The fi rst letter of the selected name will be highlighted.
Press " " or " " button to change that letter and " "
or " " button to select the other letters. By pressing
the RED button, you can store the name.
Move
Select the programme which you want to move by
navigation buttons. Press the GREEN button. By
navigation buttons move the selected programme to
the decided programme space and press the GREEN
button again.
Delete
To delete a programme, press the YELLOW button.
Pressing the YELLOW button again erases the
selected programme from the programme list, and
the following programmes shift one line up.
APS (Auto Programming System)
When you press the BLUE button for starting
automatic tuning, Auto Programming System menu
will appear on the screen:
Press " " or " " button to select your country. If you
want to exit from A.P.S. function, press the BLUE
button.
When you press OK or RED button for starting
automatic tuning, all stored programmes will be erased
and the TV will search for available channels. During
the search, the following OSD will be displayed:
Whenever you press the BLUE button, APS function
stops and Program Table appears on the screen.
If you wait until the end of APS, Program Table will be
displayed with the programmes found and located.

Source Menu

Press " " or " " button and select the sixth icon.
Then press " " or "OK" button. Source menu appears
on the screen:
02_MB45M_[GB]_3920UK_IDTV_NICKEL12_32875W_10071239_50180337.indd 67 02_MB45M_[GB]_3920UK_IDTV_NICKEL12_32875W_10071239_50180337.indd 67
In source menu, highlight a source by pressing " " or
" " button and switch to that mode by pressing "
" button. Source options are; TV , DTV/USB , EXT-1 ,
FAV , HDMI , YPbPr and PC-VGA .
Note : Once you have connected optional equipment systems
to your TV, you should select the required input to view
pictures from that source.

PC Mode Menu System

See "Connecting the LCD TV to a PC" section for
connecting a PC to the TV set.
For switching to PC source, press "SOURCE" button
on your remote control and select PC input. You can
also use "Source" menu to switch to PC mode.
Note that PC mode menu settings are available only while
the TV is in PC source.

PC Position Menu

S e l e c t t h e f i r s t i c o n b y p r e s s i n g " " o r
" " button. PC Position menu appears on the screen:
Autoposition
If you shift the picture horizontally or vertically to an
unwanted position, use this item to put the picture
into correct place automatically. This setting therefore
automatically optimizes the display.
Select Autoposition item by using " " or " " buttons.
Press "OK" or " ", " " button.
Warning : Please ensure auto adjustment is performed
with a full screen image to ensure best results.
English - 67 -
20.11.2010 10:10:30 20.11.2010 10:10:30