Velleman MVR1N Notice D'emploi page 5

Loop mode: During playback, press the REPEAT button to enter the loop mode (
point ( ) with UP and press REPEAT to determine the starting point. Now, determine the loop ending point ( )
with REPEAT. The loop will be played sequentially for four times before exiting the loop mode. To exit the loop at
any time, press the REPEAT button thrice while playing the loop.
Deleting a file: Select a file, hold the REPEAT button pressed, select to delete one file or all the files with VOL- or
VOL+, and confirm with PLAY or abort with REC/STOP.
• MP3 Playback
Enter the MP3 playback menu (
playback mode.
EQ mode: During playback, hold the MENU button pressed to enter the EQ mode (
with UP or DOWN (01 for NORMAL, 02 for DBB, 03 for JAZZ, 04 for DISCO and 05 for CLSS) and press PLAY to
confirm.
Following reading and Contrast: During playback of the loop, press the REPEAT button once to enter the
following reading mode (
the contrast mode (
REPEAT button again to exit the mode.
• Locking the Keys
Lock and unlock the keys of the recorder with the HOLD switch at the back.
• Menu Setting
o Setting Mode Selection
Switch on the recorder. Hold the MENU button pressed to enter the setting menu ( ). Select the submenu
( , ,
abort with REC/STOP.
o Audio Directory (
Press VOL+ or VOL- to select your directory (A, B or C), press PLAY to confirm or REC/STOP to abort.
o Time Setting (
Adjust the blinking digit with VOL+ or VOL-, press PLAY to confirm or REC/STOP to abort.
o Recording Mode (
Press VOL+ or VOL- to select your recording mode (SP, LP, SP + VOR or LP + VOR), press PLAY to confirm
or REC/STOP to abort.
o Sensitivity of the VOR Function (
Press VOL+ or VOL- to select the sensitivity level (01 to 05), press PLAY to confirm or REC/STOP to abort.
o EQ Setting ( )
Press VOL+ or VOL- to select the EQ setting (01 for NORMAL, 02 for DBB, 03 for JAZZ, 04 for DISCO and 05
for CLSS), press PLAY to confirm or REC/STOP to abort.
o Replay Mode (
Press VOL+ or VOL- to select the replay mode (all, one or no), press PLAY to confirm or REC/STOP to abort.
o Remaining Recording Time (
Press VOL+ or VOL- to check the remaining available recording space. Press REC/STOP to exit.
MVR1N
) with the MENU button. The controls are identical to those of the normal
). Now, you can record your own loop. Next, press the REPEAT button again to enter
). The two loops will be played sequentially so you can compare the two loops. Press the
, , , ,
)
)
)
)
)
) using the UP or DOWN button, enter the submenu with PLAY,
)
- 5 -
). Select the loop starting
xx). Select the EQ setting
VELLEMAN