3. Recording Time Table
Format
SP
LP
SP + VOR
LP + VOR
4. The Battery
• Open the battery compartment on the back of the recorder.
• Install one AAA-type (1 x LR03C included) battery respecting the polarity. Close the battery compartment.
• Hold the POWER button pressed to switch on the recorder. Check the battery status. With less than two bars, the
recorder will stop playing. Use the headphones and decrease the volume at that time, and replace the battery as
soon as possible. At insufficient power, the recorder will switch off and save the recording automatically.
Do not take out the battery during playback, or do not interrupt the connection to the PC when busy.
Remove the battery from the recorder when not in use.
A rechargeable battery may be used. For best results, however, we recommend alkaline batteries only.
5. Operation
• Switching On/Off – Time Checking
Hold the POWER button pressed to switch the recorder on or off. The recorder will automatically switch off after
two minutes of inactivity. To check the time and date, press the POWER button briefly.
• Recording
Enter the recording menu (
SP: short-playing recording, both with or without VOR function).
SP recording mode
Now, press the REC/STOP button to start recording. Stop the recording using the same button. Press the PLAY
button to pause and to resume the recording.
• Recording Playback
Enter the playback menu with the MENU button. Now, choose the file with UP or DOWN, press PLAY to
start/pause/resume playback, hold UP or DOWN pressed to fast rewind or fast forward, and adjust the volume
with VOL+ or VOL-.
Cycle mode: During playback, press the MENU button to enter the cycle mode (
UP or DOWN: all cycle (
MVR1N
Memory
) with the MENU button. Choose the recording mode (LP: long-playing recording or
LP recording mode
), single cycle (
) or no cycle (no icon).
512MB
34h40m
138h40m
34h40m
138h40m
SP + VOR recording mode
- 4 -
Remarks
No VOR function
VOR function
LP + VOR recording mode
). Select the cycle mode with
VELLEMAN