Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

DO9019WK
Before using the device it is recommended that you fill the kettle twice, boil the water
and then discard it.

HOW TO USE

1. Open the lid by pressing the release button. Fill the kettle with the desired amount
of water between the minimum (0.5 litres) and maximum level (1.7 litres).
2. Make sure the lid is firmly closed before connecting to the electric mains.
3. If you have not closed the lid properly the unit will not switch off when the water
boils.
4. If you heat less water than the minimum level the kettle will switch off before
boiling.
5. To avoid danger make sure you don't fill your kettle with more than 1.7 litres of
water, otherwise hot water may be released from the spout.
6. Make sure that the kettle is in a straight position in its base so that it makes proper
contact.
7. Push the plug into the electric socket and use the On/Off switch to turn the kettle
on. The indicator lamp will switch and the water will be heated.
8. The kettle will switch off automatically as soon as the after comes to the boil.
During the boiling process you can switch the kettle off using the On/Off switch.
9. Carefully remove the kettle from its base and pour the desired amount of water.
10. DANGER: Never open the lid when the water is boiling, wait at least 20 seconds
after the kettle has been switched off.
11. You can boil water again, as soon as the On/Off switch has switched off. For
safety purposes: remove the plug from the mains if not using the kettle.
PROTECTION FROM DRY-BOILING
If you accidentally use the kettle without water, the dry-boil protection will
automatically switch your kettle off. Wait until the kettle has cooled sufficiently and
then fill it with cold water.
MAINTENANCE AND DESCALING
Always remove the plug from the electric power before cleaning the kettle.
Never immerse the appliance or any of its parts in liquid of any kind. Make sure
that no moisture gets between the kettle and its base.
After a period of time, the effect of limescale inside your kettle may lead to
discoloration. Consider using a nontoxic descaling agent.
As alternative, fill your kettle with 3 cups of white vinegar and the rest cold water
up to 1, 7 litres. Allow this to work for a night and do not boil.
Remove the mixture after 24 hours and clean the inside with a damp cloth then
refill the kettle twice boiling the water each time Throw this water away. After
this your kettle should be clean and ready for use.
You can clean the outside of your kettle with a damp cloth.
Never use abrasive or aggressive cleaning agents.
Do not forget to regularly clean the filter in the pouring spout.
22

Publicité

Table des Matières
loading

Table des Matières