Electrical Connection - SECOH ATB-80 Instructions De Service

Instruction Manual ATB-80, ATB-100, ATB-120

3.3.2 Electrical connection

The mains connection should be secured by a circuit breaker.
•
With outside installation the relevant safety regulations are to be
•
observed. In particular, the safety classes are to be adhered to.
3.3.3 Fixture
With installation in a cabinet ventilation must be ensured, which keeps the internal
•
temperature at less than 40 ° C. Heat effects above 40° C prejudice the service life of the
wear parts.
Should the pump have to be installed at sites with high humidity,
•
driving rain or snow then installation in a water protected control
cabinet is recommended.
• Infiltrating liquid can lead to malfunctions or damage to the pump.
ATB WATER GmbH, Südstraße 2, D-32457 Porta Westfalica, www.atbwater.com
Art.-Nr.: 9060 0306 / Version: 17.08.2020 / Page 25 de 48
ENGLISH