To Assemble
Place the product on a clean, flat, level, stable, heat-resistant surface with at least 4-6 inches of
space on all sides to allow adequate air circulation.
Positioning the Upper Housing:
1. Closed/Heating Position: The Upper Housing is closed and rests on the Base. Use this position
when starting/heating the product and when grilling most foods.
2. Open Position: The Upper Housing is open. Place
the Product in this position when starting to use
the Grill function, and when grilling certain foods
in which the upper Grill Plate is not appropriate,
such as pizza or fish. Lift the Handle until the
Upper Housing is at about a 90°angle.
3. Flat Position: The
Upper Housing is open and level with the Base, creating
two cooking surfaces.
Use the product in this position when grilling
larger amounts of food.
To flatten, pull upon the Hinge Release and push
the Handle down.
Inserting/Changing Plates:
Slide the notches in the rear of the lower Grill Plate into the retaining hooks, then press down
on the front of the plate to snap it into place. Repeat to attach the upper Grill Plate.
HOW TO USE
WARNING: The Grill Plates and metal surfaces of the Upper Housing and Handle will become very
hot during use. To avoid a burn hazard, wear protective oven mitts or heat-resistant gloves when
using and touch only the black portion of the Handle.
NOTICE: Use only heat-resistant wooden, plastic, or silicone utensils to add/remove food. Do not
use a metal utensil as it may scratch the surface of the item.
NOTE: During the initial use this item may emit some light smoke. This is normal and will subside
with further use.
Hinge
Release