Blade Maintenance; Accessories; Fault Finding - Bosch AHS 40 - 24 Instructions D'emploi

If the hedgecutter should happen to fail despite the
care taken in manufacturing and testing, repair
should be carried out by an authorized customer
service agent for Bosch garden products.
For all correspondence and spare parts orders, al-
ways include the 10-digit part number from the
nameplate of the machine!

Blade Maintenance

Prior to any maintenance remove plug
from power supply.
Wear gloves when handling or cleaning the cutting
blade.
Always clean the cutting blade after operation and
lubricate with protective spray. During longer cutting
jobs, we recommend periodically lubricating the cut-
ting blade with protective spray.
Visually check the condition of the cutting edges of
the cutting blade 1. Check tightness of blade bolts.
Ensure that the blade is covered with the blade
guard 7 supplied.

Fault Finding

The following table gives checks and actions that you can perform if your machine does not operate correctly.
If these do not identify/remedy the problem, contact your service agent.
Warning: Switch off and remove plug from mains before investigating fault.
Symptom
Hedgecutter fails
to operate
Hedgecutter operates
intermittently
Motor runs but blades
remain stationary
Cutting blade hot
12 • 2 609 932 122 • 08.01
Possible Cause
No power
Mains socket faulty
Extension cord damaged
Fuse faulty
Extension cord damaged
Internal wiring defective
On/Off switch(es) defective
Internal fault
Cutting blade(s) blunt
Cutting blade has dents
Too much friction,
due to lack of lubricant
English - 4
Cleaning/Storage
Clean the exterior of the machine thoroughly using a
soft brush and cloth. Do not use water, solvents or
polishes. Remove all debris, especially from the
ventilation slots 4.
Store the hedgecutter in a secure, dry place out of
the reach of children. Do not place other objects on
top of the machine.

Accessories

Blade guard AHS 40 - 24
Blade guard AHS 48 - 24
Blade guard AHS 55 - 24
Blade guard AHS 60 - 24
Blade guard AHS 65 - 24
Blade guard AHS 6000 PRO
Blade guard AHS 7000 PRO
Lubricant spray
.............................................
Clipping sheet
..............................................
Remedy
Check power
Check other socket, replace
Check cord, replace
Replace fuse
Check cord, replace
Contact service agent
Contact service agent
Contact service agent
Have blade sharpened
Have blade overhauled
Apply lubricant spray
2 605 911 160
........................
2 605 911 160
........................
2 605 911 159
........................
2 605 911 159
........................
2 605 911 158
........................
2 605 411 159
................
2 605 411 158
................
1 609 200 399
F 016 800 055