ring PowerSourcePro REINVMA10 Mode D'emploi page 5

6. LCD Display and Indicators
Where fitted the LCD display provides additional information to help monitor and manage power from
the inverter.
Power On/Off
(Press and hold to turn
inverter on/off)
Setup Mode
The inverter can be configured by entering the setup mode
To enter Setup Mode press & hold
Press keys to select item then press
Adjust setting using
Press and hold key to exit back to Information Mode
Output Voltage
Last Error Code
Battery Size
key
then press
Last Error Code
Battery Size
Sets the AC output voltage. Only change if the application requires a different
voltage for optimum performance
Allows the last error code to be viewed
Sets the Ah rating of the battery supplying the inverter. The value is used when
calculating input current and hours remaining in conjunction with the Current
Sensor
Up/Down keys
, chosen setting will then flash
to set
Setting
N/A
90 – 540Ah
(in 30Ah steps)
GB
LCD display
Select key
Default
N/A
90Ah