Saneo KFC-816A Notice D'utilisation page 15

1.Wind speed
low.
2. Mode
Press this button to select the desired mode: normal wind, natural
wind or sleep wind.
3. Oscillation
this function is activated, the corresponding indicator lights up. Press
again to stop the oscillation.
4.Timer
hours after which your device will automatically switch to standby
mode. Each press of the timer button adds 1 hour to the operating
time.
5.Humidifying/Cooling
If you add ice packs, the air temperature can drop to 3 degrees after
a few minutes. Press this button again to stop this function.
6.Ion
not need this function, press it again.
Télécommande :
The remote control works with a CR2025 (3V) battery.
: the wind speed starts at medium, strong then
: by default, the selected mode is the normal mode.
: Press this button to oscillate the air flow. When
: Press this button to set a time between 1 hour and 7
: This button is used to refresh the atmosphere. If you do
: Press this button to select this function.