Saneo KFC-816A Notice D'utilisation page 14

• Always disconnect the air cooler before filling it or
performing cleaning or maintenance.
• CAUTION: DO NOT INSERT OBJECTS INTO THE GRID.
• Do not cover or block the air inlet and outlet.
• Leave enough space around the unit to allow air to
circulate freely. Place the unit about 50 cm away from a
wall.
• For the maintenance of your product, refer to the
paragraph "CLEANING AND MAINTENANCE".
• When using the unit, care should be taken concerning the
emission of hot water vapour.
• Unplug the unit when filling the tank and cleaning.
• Make sure that the air cooler is disconnected from the
mains before removing the protective guard.
• When the unit is not in use, turn it off and unplug it.
- Remove the appliance from its packaging.
- Remove the water tank from the air cooler and fill it with water,
ensuring the minumum and maximum water levels are respected.
- If you wish to use the cooling mode of the appliance, place the ice
packs in the water tank.
- Check the power and ensure it is identical to the rating label.
WARNING : Unplug the appliance when you fill the water tank.
Plug in the unit, the power indicator light lights up indicating that
the air cooler is on standby.
Press the
press the button again, the device goes into standby mode.
Assembly
Operating Guidelines
button, the average speed is set by default. If you