Toxic TXA-400 Mode D'emploi page 13

AUTO TURMN-ON:
For High-Level connections, use this switch to activate (or deactivate) TXA-
400 automatic turn-on circuit. For most speaker-level applications, slide the
switch to the AUTO position. If you prefer to use the remote (REM) connec-
tion, slide the switch to the OFF position.
CONNECTING THE POWER (Fig.1)
The amplifier is equipped with a plug-in auto fuse protecting set against
fault conditions. Do not use a fuse with a higher value and never bridge
the fuse over.
L.E.D
The L.E.D is a dual color indicator, when the +12v and REM +12 volt
power both switch on, The L.E.D illuminated green. this means that
the amplifier begins to work. if L.E.D illuminated red colour, this means
the amplifier is shut down from protecting circuit(thermal protection
& short protection & overload protection).
Page 13
© TOXIC 2007