UZIN VACUCLEAN 2 Traduction Du Mode D'emploi Original page 54

Open the flap as indicated in the picture below allowing the air to flow into the filtering chamber thus
providing a counter air flow that passes through the filter. Repeat this operation for at least 5 times.
Once the cleaning process has finished, remove the cap from the suction inlet and connect the accessories to
continue the vacuum process.
If the orange light indicator is still on, repeat the filter cleaning process. If after this second cleaning process
the orange light is still on, replace the filter with a new one.
Warning!
During vacuuming, avoid rolling up or twisting the flexible hose
Warning!
Never use the machine with the filter blocked.
Uzin Utz Tools GmbH & Co. KG | D-74360 Ilsfeld | Ungerhalde 1 | Tel. +49 (0)7062-91556-0 | Fax +49 (0)7062-91556-10
E-Mail tools@uzin-utz.com | Internet www.wolff-tools.de
24