Configuring The Camera - D-Link DCS-7517 Guide D'installation

Configuring the Camera

Insert the DCS-7517 CD into your computer's CD-ROM drive to begin the
installation. If Autorun is disabled, or if the D-Link Launcher fails to start
automatically, click the Start button and type D:\autorun.exe (where D:
represents the drive letter of your CD-ROM drive) and press Enter.
Click Setup Wizard and follow the instructions to
install the Setup Wizard.
Click on the D-Link Setup Wizard SE icon that
was created in your Windows Start menu (Start >
D-Link > Setup Wizard SE).
The Setup Wizard will appear and display the
MAC address and IP address of your camera(s).
If you have a DHCP server on your network, a
valid IP Address will be displayed. Otherwise, the
network camera's default static IP 192.168.0.20 will
be displayed. Select your camera, then click the
Wizard button to continue.
Enter the Admin ID and password. When logging in
for the first time, the default Admin ID is admin with
the password left blank.
Click the checkboxes if you wish to change the
admin ID and password for the camera, and enter
the new ID and password you wish to use.
Click Next to continue.
Select DHCP if your camera obtains an IP address
automatically from a DHCP server such as a router.
Select Static IP if you want to manually enter the IP
settings for the camera.
Click Next to continue.
8
D-Link DCS-7517 Quick Installation Guide