Buttons Function - CONTINENTAL EDISON CEKT5B3 Instructions D'utilisation

BUTTONS FUNCTION

Button in power off status
Press button to turn on
Button in power on status
Long press to turn off / Zero button
Mode conversion / Unit conversion
1. Press the UNIT button to convert the mode and unit circularly
2. Long press switch button to turn off or auto power-off after a few seconds
Note: The unit system of scale depends on scale destination or the requirement
of distributor.
9
Press the circle button to trun on
the scale. Once available, button
would be lighted up and flicker.
WEIGHING
Load
weighing
object
1. Place the scale on a solid and flat surface.
2. Place bowl (if any) on the scale.
3. Press button to turn on the scale.
4. Start weighing when LED shows "0". Press
weighing mode.
5. Load weighing object on scale(or bowl) to start weighing. LED will show
the weight reading.
10
button to convert to