Assembly; Use; Preparation - Paintmaxx Q1P-WT01-100 Mode D'emploi

Assembly

1. Place the bracket for the spray gun into the opening on the basic unit which is provided
for it.
5. Secure the carrying strap on the eyelets which are provided for it on the basic unit.

Use

Preparation

PLEASE NOTE!
Please note! This device generates a volume of up to 93.8 dB. For this reason,
❐
wear suitable hearing protection!
Wear a face mask for your own safety.
❐
Wear protective goggles for your own safety.
❐
Wear work gloves when you work with the device.
❐
04311_DE-GB-FR-NL_V0.indb 22 04311_DE-GB-FR-NL_V0.indb 22
2. Connect the air hose to the spray gun by inserting the hose
connection into the hose receptacle on the spray gun. The
hose connection must be plugged fully within the hose
receptacle.
3. Connect the air hose to the basic unit. Make sure that the
locking lug on the basic unit rests securely in the groove of
the hose connection.
4. Place the bracket for the spray gun into the opening on the
basic unit.
22
26.11.10 11:30 26.11.10 11:30