Haier HRB15N3 Instructions D'installation Et Guide De L'utilisateur page 9

13. Move the door closure to the opposite side. Flip over the door
closure so that the curved edge of the closure is toward the
center of the door.
14. Remove innermost screw. Fit the door closure on top of the
door stop screw, and fasten with the innermost screw.
a
Door Closure
REMOVE AND REVERSE FREEZER DOOR
1. Remove the two screws attaching the center hinge to the
bottom of the refrigerator compartment. Remove the center
hinge and save for possible future use.
2. Lift the freezer compartment door from the bottom hinge.
3. Move the hole plugs and the screw to the opposite side.
a
a
Hole Plugs
4. Move the hole plug on the top of the freezer door to the
opposite side.
a
5. Using a Phillips screwdriver, remove the two screws fastening
the plastic door closure and the metal door stop to the bottom
of the door.
6. Remove the screw from the door closure, and replace the screw
into the hole from which it was removed.
7. Move the door stop to the opposite side. Insert screw into the
center hole and fasten.
a
a
Hole Plug
a
b
a
Door Closure
b
Door Stop
a
Screw
b
Door Stop
a
b
7