Ball Valve; Heat Meter; Transport And Storage; Installation - oventrop Multidis SH Notice D'utilisation

"Multidis SH"

4.1 Ball valve

Illustr. 4: Dimensions ball valve in mm
Item no. Size
1406383 DN20
1406384 DN25
1406483 DN20
(with thermo-
meter)
1406583 DN20
(with thermo-
meter)
1406484 DN25
(with thermo-
meter)
1406584 DN25
(with thermo-
meter)
- The ball valves item no. 1406483
and 1406484 have a red T-handle
which shall mark the supply pipe.
- The ball valves item no. 1406583
and 1406584 have a blue T-handle
which shall mark the return pipe.
The length with installed ball valve is
obtained by adding the length of the
stainless steel distributor/collector
"Multidis SH" (L) and the length of the
ball valve (L1).
140725280-V03.01.2020
D L1 L2
G¾ 55 mm 57 mm
G1 80 mm 60 mm
G¾ 73 mm 60 mm
G¾ 73 mm 60 mm
G1 85 mm 60 mm
G1 85 mm 60 mm

Transport and storage

4.2 Heat meter

Standard heat meters G1 and G¾ can be
installed.
The dimensions of the heat meter
can be obtained from the heat meter
manual.
5. Transport and storage
Transport the product in the original packaging.
Store the product under the following
conditions:
Temperature -20°C to +60°C
range
Relative
max. 95%
humidity of air
Particles
Dry and free from dust
Mechanical Protected from
influences
mechanical agitation
Radiation Protected from UV-rays
and direct sunlight
Chemical Do not store together
influences
with solvents, chemicals,
acids, fuels and similar
6.

Installation

The brackets allow for the fixing of the
distributor/collector onto the wall.
1. Mount the the flow distributor and the
return collector into the sound-absorbing
brackets.
2. Fix them onto the wall or in the cabinet.
The supply and return pipe can be
connected from either the left or right
hand side.
19