Publicité
Les langues disponibles
Les langues disponibles
User Manual
Specification
▪
DisplayPort 1.4 compatible
▪
HDCP 2.2 & DPCP 1.0 compliant
▪
HDR 10
▪
Maximum bandwidth: 25.92Gbps
▪
Maximum resolution & distance:
7680x4320@60Hz 4:2:0 8bit
3840x2160@144Hz 4:2:2 10bit
3840x2160@60Hz 4:4:4 8bit
3840x2160@30Hz 4:4:4 8bit
1920x1080@60Hz 4:4:4 8bit
▪
Maximum cascadable distance of 32m (104.99ft) is achieved by using the following cable lengths:
▪
2m – 5m – 5m – 5m – 5m – 10m
▪
Storage temperature: -20°C - 60°C (-4°F - 140°F)
▪
Operating temperature: 5°C - 40°C (41°F - 104°F)
▪
Humidity: 0-80% RH (non-condensing)
▪
Dimensions: 55x54x20 (2.17x2.13x0.79in)
▪
Housing material: Plastic
Installation
Please note: The specified maximum resolutions and distances listed in the specification section of this
manual are reliant on the use of high-quality DisplayPort cables. We strongly recommend using Lindy Gold
Line DisplayPort cables to achieve the best results.
For successful installation, please follow the steps below:
1. Using a high-quality DisplayPort cable, establish a connection between a source device and the input
port on the repeater.
2. Connect a second high-quality DisplayPort cable to the output port on the repeater and an appropriate
display or projector.
Note: When cascading this repeater up to 5 levels, connect the output of the first repeater to the input
of the second, continue this process using up to 5 repeaters, finally connecting the output of the last
repeater to a display or projector.
3. Connect the multi-country power supply to an appropriate outlet and the DC jack to the power port on
the repeater. When cascading, please ensure all repeaters are powered.
4. Power on the source and display devices.
5. Installation is now complete.
Resolution
Input / Output length
2m (6.56ft) / 10m (32.81ft)
2m (6.56ft) / 10m (32.81ft)
10m (32.81ft) / 20m (65.62ft)
15m (49.21ft) / 20m (65.62ft)
15m (49.21ft) / 20m (65.62ft)
English
Publicité
