Publicité
Les langues disponibles
Les langues disponibles
Précautions
•
Check that the device is not swamped.
•
Do not use bleach or abrasives to
wash the device. Use water and mild
detergent.
•
Do not use the appliance outdoor.
•
Place the device on a hard surface.
•
The
device
temperatures between 5 and 35°C.
•
Allow at least 20 cm of space on all sides
of the unit for good air circulation.
•
Do not connect the dehumidifier to a
The product does not work properly
Situation
The unit does not start.
The dehumidifier does not dry
the air as it should.
The device makes a loud noise
when operating.
Frost appears on the coils.
Water on the floor.
E1, E2, E3, P1 or P2 appear on
the display.
is
suitable
for
Solution
Make sure the dehumidifier's plug is pushed completely
into the socket.
Check the house circuit breaker.
Dehumidifier has reached its preset level or the tank is
full.
Tank is not in the proper position.
Allow enough time for the moisture to be absorbed.
Make sure there are no curtains, blinds or furnitures
blocking the front or back of the dehumidifier.
The humidity control may not be set low enough.
Check that all doors, windows and other openings are
securely closed.
Room temperature is too low, below 5°C.
There is a kerosene heater or a vapor generating
appliance in the room.
The air filter is clogged.
The unit is tilted instead of upright as it should be.
The floor surface is not level.
This is normal. The dehumidifier has an auto defrost
feature.
The hose connection may be loose.
Tighten connections.
These are error codes and protection codes. See the
"Control panel description ⑧" section.
multiple socket outlet, which is also being
used for other electrical appliances.
•
Plug the unit to an electrical socket with
earth conection.
•
The dehumidifier must be operated in an
enclosed area to be more effective.
use
at
13
Publicité
