Samsung WA48H7400A Manuel D'utilisation page 19

display
2
temp. selection
3
button
spin selection
4
button
soil level
5
selection button
select cycle
6
option
start/pause
7
selection button
8 power button
WA7000HA WASH_WA48H_USER MANUAL_DC68-03133P-13_EN.indd 19
WAterproof - For waterproof or water-resistant items.
 Do not wash waterproof items and non-waterproof items together.
 Check the specification label on the fabric item and see if the
item is waterproof. Do not wash non-waterproof items with the
WATERPROOF cycle.
perm press - For wash-and-wear, synthetic fabrics, and lightly to normally
soiled garments.
Active WeAr (WA48H7400A*, WA45H7200A*) - Use this cycle to wash exercise
wear such as sports jerseys, training pants, shirts/tops and other performance
clothing. This cycle provides effective soil removal with gentle action for special
fabric care.
quick WAsH - For lightly soiled garments needed quickly.
spin - Drains the water and spins at a high speed.
rinse + spin - Use for loads that need rinsing only or to add rinse-added
fabric softener to a load.
Provides instructions and diagnostics while keeping you updated on the cycle
status and time remaining.
Press the button repeatedly to cycle through the different water temperature options.
Hot - Whites and heavily soiled, colorfast items.
Warm - Colorfast items.
eco Warm - Moderately soiled, colorfast items; most wrinkle-free items.
cold - Brightly colored, very lightly soiled items.
tap cold - Cold water with no warm water added.
 If you select the Tap Cold option, all the lamps for the water temperature
options are turned off.
Press the button repeatedly to cycle through the different spin speed options.
High - Use for underwear, t-shirts, jeans, and sturdy cottons.
medium - Use for jeans, wrinkle-free or wash-and-wear items, and synthetics.
low - Use for delicate items needing a slow spin speed.
no spin - Drains your washer without spinning. Use for extremely delicate items
that cannot tolerate any spin.
Press the button to select the soil level/washing time.
Heavy - For heavily soiled loads.
normal - For moderately soiled loads. This setting is best for most loads.
light - For lightly soiled loads.
Press these buttons to select different cycle options.
AquaJet deep clean (WA48H7400A*) - Improve washing performance
tm
through longer AquaJet spray action. Water Level can be adjusted.
AquaJet (WA45H7200A*) - Improves the washing & rinsing performance using
tm
falling water.
extra rinse (WA45H7000A*) - Change from spray rinse mode to deep rinse
mode, and rinse once again.
delay end - Delay the end of any cycle for up to 19 hours in one-hour
increments. Displayed hour indicates the time the wash will be ended.
self clean - Use to clean dirt and bacteria from the drum. Regular use (after
every 40 washes) is recommended. No detergent or bleach is needed.
pre soak - It adds 15 minutes soaking time at the start of the wash cycle for
better stain removal.
Press to pause and restart cycles.
Press once to turn your washer on. Press again to turn your washer off. If the
washer is left on for more than 10 minutes without any buttons being pressed, the
power automatically turns off.
English - 19
2016/6/22 10:33:24