Declaration Of Conformity Ес/Ееа - Belmash SDM-2000 Instructions D'utilisation Originales

Machine-outil multifonctionnelle du bois
Masquer les pouces Voir aussi pour SDM-2000:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

EN
This operating manual establishes machine service instructions and rules of safe operation.
Please read all instructions contained in this operating manual before using the machine.
The woodworking machines, if not operated safely, may endanger human life and health.
Hazardous exposure: noise, vibration, dust and cutting wastes, electricity.
Compliance with the requirements, specified in the operating manual, ensures safety while in use
and helps to avoid problems during operation and maintenance.
This operating manual does not reflect slight changes and modifications in machines, made by the
manufacturer after the publication of this manual, as well as changes in component details and
documentation attached to it.
1. DECLARATION OF CONFORMITY ЕС/ЕЕА
Joint limited liability company "Belmash factory" declares that multifunctional woodworking
machines BELMASH SDM-2000, BELMASH SDM-2200, BELMASH SDM-2500 comply with
the following requirements of EU Directives, including changes:
2006/42/EC
Machinery (MD)
2014/30/EC
Electromagnetic Compatibility (EMC)
2011/65/EU
Restriction of Hazardous Substances (RoHS)
A basis for concordance of the mentioned above devices with the EU Directives is their full
compliance with the applicable standards listed below:
EN 61029-1:2009+A11:2010; EN 61029-2-1:2012; EN 61029-2-3:2011;
EN 62233:2008 (incl. Corr: 2008); EN 55014-1:2017; EN 55014-2:2015; EN 61000-3-2:2014;
EN 61000-3-3:2013+A1:2018; EN 61000-3-11:2017; IEC 62321-1:2013; EN 62321-1:2013;
IEC 62321-2:2013; EN 62321-2:2014; IEC 62321-3-1:2013; EN 62321-3-1:2014; IEC 62321-4:2013;
EN 62321-4:2014; IEC 62321-5:2013; EN 62321-5:2014; IEC 62321-6:2015; EN 62321-6:2015;
IEC 62321-7-1:2015; EN 62321-7-1:2015; IEC 62321-7-2:2017; EN 62321-7-2:2017
01/343
Responsible for technical documentation - Director Mr. Shorikov D.V.
Manufacturer's address:
JLLC Belmash factory, 212000 Belarus, Mogilev, Slavgorodskiy proezd 37
Place and date: Minsk, Belarus 27.06.2019
Director _______________ Shorikov D.V.
Conformity certificates are stored at the address: JLLC Belmash factory
37 Slavgorodskiy proezd, Mogilev, 212000, Republic of Belarus, info@belmash.by.
14

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Sdm-2200Sdm-2500

Table des Matières