HQ JC40 Mode D'emploi page 3

Stationery
Pens, printer heads, etc.
OPERATING INSTRUCTIONS
Metal Articles
Watch parts, coins, badges valves,
nozzles, etc.
1. Open the lid and fill the tank with water. Insert the article
which you want to be cleaned (must be submerged in the
water but not exceeding the top mark).
Operating the device without water will cause damage.
2. Close the cover. Connect the unit with Power
3. Press ON to start cleaning, the indicator light (blue) around
the control panel turns on.
During cleaning a "sizzling" noise can be heard, this is
normal, it comes from the tank.
4. After the cleaning is finished, disconnect from mains power
supply. Open the cover, take out the cleaned article and
drain off the water.
3
Cutlery
Forks, knives, spoons, etc.