Rear Panel - PIONEER DJ PLX-500-K Mode D'emploi

Rear panel

1 PHONO/LINE switch
Switches the level of the sound output from the unit.
— [PHONO]: Select this when the unit is connected with a device
that supports phono level input, such as a pre-main amplifier or
component.
— [LINE]: Select this when the unit is connected with a device that
supports line level input, such as a powered speakers.
CAUTION
Do not connect the unit with a device that supports phono level input
while the PHONO/LINE switch is in the [LINE] state.
2 USB terminal
Connect the USB cable (included) here.
= Connecting with a computer (p. 13 )
3 Audio cable
= Connections (p. 12 )
4 AC IN
Connects to a power outlet using the included power cord. Wait until
all connections between the equipment are completed before con-
necting the power cord.
! Be sure to use the included power cord.
5 Insulator
Suppresses the effect of outside vibration. Turning the insulator
adjusts the turntable height.
= Adjusting the height of the main unit (p. 13 )
1 2
3 4 5
9
En