Clean Air Optima CA-404W Mode D'emploi page 9

Troubleshooting
The following is a troubling shooting guide to help you solve any issues that you may have
using the Clean Air Optima
Problem
Device does not
switch on
Device is noisy
The remote control
does not work
®
Circulator-fan CA-404W
Possible Cause
Power plug not plugged in
ON / OFF button not activated
There may be too much dust
on the device/fan blades
The device is on an unstable
surface
Check if the battery
is installed
Check if the battey
is in-stalled correctly
Check the capacity
of the battery
Check the remote control
distance exceeds the range
Solution
Plug in device
Press ON / OFF button
Clean the device and fan blades
Place the device on solid and
even ground
Install the battery
Install the battery correctly
Replace te battery
Range is within 5 meters from
the front-side of the device
9