Operating Time; Maintenance And Cleaning - PALSON Multifruit-pro Mode D'emploi

FEATURES
- Attractive, simple, elegant design, modular, easy to use and clean.
- High speed electric motor with protective device to prevent overheating, optimum
performance, saves time and money, durable motor.
JUICING
- Before starting, check that the speed selector switch is at "O". That way, if the assembly
is not complete, the motor unit will not start, thereby preventing unnecessary damage
to materials or harm to people.
- Make sure the appliance is correctly assembled before use. Put the prepared vegetables
or fruit into the feeder opening, plug in the appliance and press with the rod, ensuring
that the pressure is applied slowly, strongly and evenly to obtain fresh, healthy fruit or
vegetable juice.
- Note: when pressing the food with the rod, exert even pressure. It must not be greater
than 1 kg or too sharp, as that could reduce the juicing capacity.

OPERATING TIME

This appliance has different speeds: O, I, II and
*
speed and normal speed by impulses). To obtain juice select the normal speed setting
"II". After 1 minute of operation, stop the appliance for 1 minute, after which time it can be
used again. After performing this operation three times running, let the appliance rest for
15 minutes. Do not start it up again until the motor has cooled down. That way, you will
lengthen the useful life of the appliance and obtain a better performance.

MAINTENANCE AND CLEANING

- If you are not going to use the appliance for a long period of time, store it in a dry, well
ventilated place to prevent the motor from becoming damp or developing mould.
- Do not wash the motor assembly. Use only a damp cloth to clean it. The other components
(rod, lid, juice collector, pulp container...) can be washed under the tap.
Thank you for confiding in us by choosing one of our products.
*
("O" stop, "I" low speed, "II" normal
7