Safety Precautions - PALSON Multifruit-pro Mode D'emploi

GB
Our products are designed to meet the highest standards of quality, functionality and design.
We hope you enjoy using your new PALSON MULTIFRUIT-PRO Fruit Juicer.

SAFETY PRECAUTIONS

- Read all the instructions and keep them for future use.
- Before using the appliance, put it on a stable, flat surface.
- Before starting to use the machine, check that the sieve and rotor fit properly into
place and that there is no forced contact between the sieve and transparent lid. Put the
transparent lid on the appliance, secure the grip in position and turn the appliance on.
- When using for the first time, while the motor is operating you may notice a strange
smell. This is normal and will disappear once the motor has been used for a certain
length of time.
- When extracting the juice, check that not too much juice and pulp is stored in the juice
collector and pulp container. If they become too full, turn off the appliance, clean it and
turn it on again.
- Do not open the lid while the appliance is operating. Do not put your fingers or any
utensil in the opening while the appliance is turned on as this could cause a serious
accident or damage the appliance.
- To guarantee the useful life of this appliance, the motor contains a device to protect
it from overheating. If the motor is on for too long or becomes overheated, the power
will be cut off automatically as soon as a certain temperature is reached. If the motor
stops, unplug the appliance and let the motor cool (for about 30 minutes) before using
it again.
- When the appliance is on, do not leave it unattended or allow children to use it.
- It must not be used when empty or when overloaded.
- After use, unplug the appliance before touching it.
- To prevent risks during cleaning, put the sieve under the tap.
- Do not use this appliance for any purpose other than the one for which it is intended.
- This fruit juicer has a safety device: the motor will not function if the grip does not exert
pressure on the lid or the blade is not properly seated. This way, the safety of users is
guaranteed.
- To assemble and dismantle the appliance, press the top part of the opening and then
slide the grip in the correct direction with respect to the groove on the lid.
- To dismantle the sieve, first remove the lid and pulp container, lift the juice collector
holding it by the mouth and pull upward. This way, the sieve will automatically be
separated from the rotor.
- To prevent damage, before using this appliance check that the power supply coincides
with the nominal voltage.
- Clean all parts that can be dismantled (consult the section on "maintenance and
cleaning").
- If the power cable is damaged, it must be replaced by the manufacturer or an authorised
technical repair service or by a qualified technician, to prevent risks. Never tamper with
the appliance yourself.
- This product is not to be used by children or other people whose physical, sensorial or
mental condition prevents them from using it safely without assistance and supervision.
Children must be supervised to ensure they do not play with this product.
6