Rear Panel - audiophony MPU130BT Guide De L'utilisateur

AUDIOPHONY PUBLIC ADDRESS
[11] REPEAT Button
Allows you to switch from a Repeat mode to another:
- REPEAT 1 : The current track will be repeated ad
infinitum
- REPEAT FOLDER : The contents of the current folder
will be repeated ad infinitum
- REPEAT ALL : The contents of the current media will
be repeated ad infinitum
- The repeat function is deactivated when none of
these 3 indications appear on the display.
In Tuner mode, this button allows you to switch from
FM to AM (and vice versa).
[12] RAN Button
Allows you to activate/deactivate the random
playback. The function is activated when the display
indicates RANDOM.
[13] MUTE Button
Allows you to interrupt the audio output without
pausing the current track. Press this button to activate/
deactivate this function.

7.2 - Rear panel

20
21
L
R
[20] Bluetooth antenna
[21] Unbalanced outputs
These RCA send an analogue, unbalanced signal (-10
dB) to your sound system.
[22] FM Antenna connector
Connect your FM antenna cable here.
[23] AM Antenna connector
Connect your AM loop antenna here.
[14] PLAY/PAUSE Button
Allows you to play/pause the current track.
[15] STOP/EJECT Button
Allows you to stop the current track and eject the CD
from the player. When using a USB key or SD card,
please always press this button before removing the
media from its slot.
[16] FOLDER Buttons
Allow you to move from a folder to another. Folders are
numbered by alphabetical order.
When using an Audio CD, these buttons allow you to
search a specific time within the current track.
[17] SKIP Buttons
Allow you to select a file within a folder, or select a track
on an Audio CD.
[18] TUNING Buttons
In Tuning mode (radio), use these buttons to modify the
receiving frequency. Hold this button to automatically
jump to the next available station.
[19] Volume control knob
Allows you to increase/decrease the volume of your
device.
22
AM LOOP
FM 75Ω
COAXIAL
23 24
[24] 12 V DC power supply
The MPU130BT can use a 12 V DC power supply unit
connected to this socket.
[25] 220 V AC power supply
Connect here the supplied 220V power cord.
Note: this connector contains a fuse. If need to replace
the fuse, please only replace it by a new one with the
exact same characteristics.
ENGLISH
FUSE :
1A - 250V
5 x 20 mm
25
Page 15