audiophony MPU130BT Guide De L'utilisateur page 13

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

AUDIOPHONY PUBLIC ADDRESS
6-2 - USB supports and SD cards
The MPU130BT is able to read files stored on USB sup-
ports such as USB keys , USB hard disks, or any other
type of devices compatible with the USB Mass Storage
norm.
Your device can read the following formats stored on
USB support:
- MP3 (VBR or CBR) up to 320kbits/s
- WMA (same characteristics)
Your disks must be FAT-formatted to be compatible with
the MPU130BT. The Mpu130 is unable to read contents
via supports with different formats (NTFS, ...).
Please note that some FAT devices might present com-
patibility issues due to specific commands or functions
they might offer.
That is why we strongly recommend to test the compati-
bility of a device with the MPU130BT before acquiring it.
6-3 - Playing MP3/WMA files
MP3 files may have two formats: Constant bitrate (CBR) and Variable bitrate (VBR). The MPU130BT the reading and
DJ reading of both CBR and VBR MP3 files. However, you might notice that the super-fast search speeds are slower
for VBR files,
in comparison with CBR files. As a result, if speed is an important factor to you, we recommend to use MP3 files in
the CBR format. The MP3 files must meet the following criterias indicated below:
MPEG-1
MPEG-2
MP3 Format
ID3 Label
File extension
WMA Format
File extension
The MPU130BT powers up USB keys and HDD USB-
connected.
However, some disks or keys might require a power
supply unit delivering more power than the MPU130BT.
We strongly recommend to use these devices with their
external power supply unit in order to prevent any kind
of problems or damages.
The USB port of the MPU130BT is a USB Mass Storage
port. It cannot be used to read audio fluxes such as
the USB Audio codec under any circumstances. The
MPU130BT is therefore not compatible with the devices
uses such fluxes such as computers, portable players,
USB microphones, etc.
The SD card slot has the same file properties and
restrictions as the USB port. SD HC can be used with
the MPU130BT, subject to not exceed a maximum size
of 16 Gb.
Compatible with the Audio Layer-3 sampling rate from 32 kHz, 44,1 kHz,
48 kHz; Bit rate: 32 Kbps at 320 Kbps.
Compatible with the Audio Layer-3 sampling rate from 16 kHz, 22,05
kHz, 24 kHz, Bit rate: 16 Kbps (stereo) a 160 Kbps.
Compatible with the ID3 Versions 1.0/1.1/2.2/2.3/2.4. Indicates the title,
album, artist, and genre. Alphanumeric characters and some symbols
only can be displayed.
.mp3, .MP3, .mP3, .Mp3
.wma, .WMA
ENGLISH
Page 13

Publicité

Table des Matières
loading

Table des Matières