Samson Expedition XP300 Mode D'emploi page 12

Configuring the XP300 for Transport
You can easily carry your sound system using the XP300 Slide and Lock feature. The Slide and
Lock speaker enclosures allow you to connect both speakers together into a single, easy to carry
unit. Follow these steps to configure the XP300 for transport.
1. Place one speaker on the floor and set it on its side.
2. Position the second speaker above the first speaker
and line up the "Slide and Lock" tracks and grooves
so that they are parallel to the speaker on the floor.
Speaker cabinets must be reversed with respect to top
and bottom.
3. Slide the second speaker into the speaker on the floor
making certain that the two speakers stay parallel to
each other.
4. You will feel a slight click when the two speak-
ers are in place.
5. The XP300 can now be carried or trans-
ported as a single unit.
12