Alesis RECITAL PRO Guide D'utilisation page 11

To change the vibrato depth:
1. Press the Function button to enter Function Mode, then turn the Value Dial to select
Vibrato Depth.
2. Press the Function button again to enter the corresponding edit menu. The parameter will
flash, indicating it is editable.
3. Turn the Value Dial to adjust the vibrato depth from 000–127.
4. After 7 seconds of inactivity, the Display will return to the main screen.
To change the rotary speed setting:
1. Press the Function button to enter Function Mode, then turn the Value Dial to select
Rotary Speed.
2. Press the Function button again to enter the corresponding edit menu. The parameter will
flash, indicating it is editable.
3. Turn the Value Dial to change the rotary speed setting:
•
Pedal: The rotary speed is controlled by the Sustain Pedal. Press the pedal to set
the rotary speed to fast, and release the pedal to set the rotary speed to slow.
•
Slow: The rotary speed is set to slow.
•
Fast: The rotary speed is set to fast.
Note: When the rotary speed setting is set to Pedal, the Sustain Pedal cannot be used to
sustain the sound. When the rotary speed setting is set to Slow or Fast, the Sustain Pedal
can be used to sustain the sound.
4. After 7 seconds of inactivity, the Display will return to the main screen.
EQ
The EQ function controls the gain of different frequency bands.
To change the EQ type:
1. Press the Function button to enter Function Mode, then turn the Value Dial to select EQ
Type.
2. Press the Function button again to enter the corresponding edit menu. The parameter will
flash, indicating it is editable.
3. Turn the Value Dial to select the desired EQ type:
•
Standard
•
Modern
•
Rock
•
Classic
•
Jazz
4. After 7 seconds of inactivity, the Display will return to the main screen.
11