Personal Protective Equipment (Ppe); Handling; Packaging; Reception - ORTEA NEXT ICAR MICROmatic Manuel D'installation

ICAR by ORTEA NEXT
 performance of inspection, maintenance or repairing routines without disconnecting the unit
WARNING T M
HE ANUFACTURER SHALL NOT BE HELD LIABLE DUE TO ANY DAMAGE TO PEOPLE AND BELONGINGS
ARISING FROM INCORRECT USE AS ABOVE DEFINED
WARNING E
XCLUDING OR BYPASSING IN ANY WAY THE ALARMS IS STRICTLY FORBIDDEN
DISCLAIMS ALL RESPONSIBILITY ON THE UNIT SAFETY IN CASE OF FAILURE TO RESPECT SAID BAN
3.4 P P
ERSONAL ROTECTIVE
While dealing with the unit, the user must have and use suitable PPEs, in conformity with the safety
requirements enforced in the Country of installation and with the relevant European Directives (89/656/EEC
and 89/686/EEC). The Manufacturer strongly recommends to dress suitably, avoiding clothes that might get
caught up, wide sleeves, synthetic material, scarves and ties. Necklaces, bracelets, metallic wristwatches
and similar object should also be avoided. In the table below, the recommended PPEs are listed:
S
AFETY SHOES
S
AFETY GLOVES
S
AFETY DIELECTRIC
GLOVES
H
ELMET
VI /
SOR GLASSES
A -
NTI ARC VISOR
G -
ENERIC ANTI
DUST MASK
WARNING A
VISITOR CAN APPROACH A WORKING UNIT
INTERNAL COMPONENTS BE SHOWN
. O
TO BE SWITCHED OFF THERWISE

HANDLING

4.1 P
ACKAGING
The units can be packaged either in cardboard boxes strapped to a pallet and wound in plastic film or in a
wooden crate with seaworthy vacuum bag. Each unit is provided with a label indicating nominal data,
consignee data and purchasing order details. The package bears the usual pictograms (S;U;V) and, in case
of wooden crate, the indication of the lifting points for chains or fork-lift trucks. With cardboard box
packaging, anti-shock and anti-tilting indicators are also affixed.
4.2 R
ECEPTION
At reception, check the integrity of the packaging and the absence of evident damage occurred during
transport. If the unit does not require immediate installation, store it with its original packaging. Once the
good condition of the delivery has been established, unpack the unit and check it. In the unlikely event of
damage, notify the Manufacturer in writing immediately.
4.3 S
TORAGE
Should the unit be stored, ensure that it is kept sheltered from rain or snow, excessive humidity, adverse
climatic conditions (atmospheric pollution, saline atmosphere, parasites, etc.) at a temperature between -
5°C and 40°C.
4.4 M
OVING THE UNIT
WARNING T
HE UNIT MUST BE KEPT IN VERTICAL POSITION
A HORIZONTAL POSITION MIGHT SERIOUSLY DAMAGE THE INTERNAL COMPONENTS
COMPROMISE THE FUNCTIONALITY
Unloading and moving operations are under the User's responsibility. Take the utmost care in order to avoid
damage to whoever might be around the unit, to the unit itself and to belongings or other equipment on the
installation site. Unloading and moving operations can be performed via cranes fitted with chains or lifting
brackets or fork-lift trucks The lifting devices must be suitable to the unit weight, in good conditions and
regularly checked and maintained.
DANGER H
ANDLING OPERATIONS MUST BE CARRIED OUT ONLY BY AUTHORISED
PROVIDED WITH THE NECESSARY
SAFETY AT WORK RULES AND REGULATIONS ENFORCED IN THE
MANUALS OF THE TOOLS USED
.
E (PPE)
QUIPMENT
USER MAINTAINER
 
 





,
REGARDLESS OF THE PROTECTION AGAINST ACCIDENTAL CONTACT
,
THE VISITOR SHALL BE KEPT AT A SAFETY DISTANCE BY MEANS OF PHYSICAL BARRIERS
.
P P
ERSONAL ROTECTIVE
. T M
HE ANUFACTURER SHALL NOT BE HELD LIABLE FOR ANY DAMAGE THAT MIGHT OCCUR TO
DANGER
Bumping, tripping, slipping,
crushing limbs
Contact with sharp surfaces
or edges
Contact with live parts when
testing an energized unit
Bumps to the head in the
presence of suspended loads
or work inside the enclosure
Contact with liquids and
projectile
Contact with projectile and
radiation from electric arc
Particulate and/or dust
inhalation
ONLY
IF THE LATTER IS COMPLETELY CLOSED
,
AS INDICATED ON THE PACKAGING
,
ALTER THE MECHANICAL STABILITY AND
E (PPE). A
QUIPMENT LWAYS OPERATE IN CONFORMITY WITH THE
C
OUNTRY OF INSTALLATION AND WITH THE INSTRUCTION
18 / 40
MAT189 jun19
. T M
HE ANUFACTURER
.
CONSEQUENCE
Bruises, abrasions, cuts,
sprains, dislocations,
fractures
Bruises, abrasions, cuts
Elettrocution
Bruises, abrasions, cuts,
concussion, fractures
Eye injury, eyesight loss or
limitation
Eye injury, eyesight loss or
limitation
Respiratory disorders
. S
HOULD THE
,
THE UNIT WILL HAVE
. L
AYING IT DOWN INTO
,
SUITABLY TRAINED PERSONNEL
.