EN //
USER GUIDE
T H E A P P
Downloading The iVide Plus Jnr Thermal Circulator APP
If the iVide Plus Jnr Thermal Circulator APP has not yet been downloaded, it can be downloaded from the
Apple Store (IOS) or Google Play (Android). It is compatible with IOS version 9.3.5 and later. It is compatible
with Android version 4.3 and later.
Note: Please check with your mobile phone or device's manufacturer if you have aquestion about downloading
APP.
Six Steps To Configure The iVide Plus Jnr Thermal Circulator APP
Installing theiVide Plus Jnr Thermal Circulator APP is quick, in contrast to some other apps. The iVide
APP allows instant use, providing the necessary information exactly when you need it. We have developed
a completely new approach to this kind of applications because every moment in the kitchen should be
unforgettable. The APP is compatible with the iVide Plus Jnr Thermal Circulator with Wi-Fi. The App makes
cooking with the iVide Plus Jnr Thermal Circulator incredibly easy. Simply select the food, adjust the settings,
and press Start.
Six Easy Steps
1
1
Select the appliance you want to use, and press "CONNECT".
2
The app will detect a connected Wi-Fi network. Enter the password and press 'Confirm' .
3
The application starts searching for the iVide Plus Jnr Thermal Circulator. Hold down the °C / °F and
START/STOP buttons for a couple of seconds until the Wi-Fi light begins to flash. Wait until the appliance
finishes automatic configuration.
4
At the end, you will see a message confirming the appliance is ready to be connected.
5
Make sure the Wi-Fi light has stopped flashing and then press the 'Connect' button. If you need help, read
the hints and tips on the display.
6
Congratulations! The iVide Plus Jnr Thermal Circulator has just been configured! Enjoy your cooking!
Note:The Apple and iPhone logos are trademarks of Apple Inc., registered in the USA and other countries. Apple
Store is a service mark of Apple Inc. Android; Google Play and Google Play logo are trademarks of Google Inc.
8
2
3
4
5
6