INSTRUCTIONS ON ASSEMBLY AND USE
EN
CONGRATULATIONS ON PURCHASING
THIS PRODUCT!
Please read these instructions carefully. The instructions are an integral
component of the product. Therefore, please store them and the
packaging carefully in case questions arise in the future. Please always
include these instructions when handing on the product to a third party.
This product must be mounted by an adult. This product is designed for
private/domestic use only. This product is not designed for commercial/
industrial use. The use of the product requires certain capabilities and
skills. Always adjust according to the age of the user and use for the
purpose it has been designed for.
TECHNICAL SPECIFICATIONS
Item:
Safety package - HUDORA BigWheel
Item number: 14110
Purpose:
Separate front and rear light unit for retrofitting the
HUDORA BigWheel
areas.
If you have assembly problems or would like further information on
the product, we have all you need and more at http://www.hudora.de/
service/.
Generation V
®
Generation V for use in non-public
®
CONTENTS
1 x LED front light unit | 1 x LED rear light unit | 1 x USB charger cable |
1 x These instructions
Other items are meant to facilitate safe transportation and are not requi-
red for the installation and use of the product.
SAFETY INSTRUCTIONS
• ATTENTION: This safety package is especially designed for use with
the HUDORA BigWheel
®
Generation V. Please therefore observe the
safety instructions in its assembly and operating instructions.
• ATTENTION: The light units must be mounted and used in such a way
that they do not dazzle other people.
ASSEMBLY INSTRUCTION
The front light unit can easily be clicked onto the V-shaped handlebars of
the HUDORA BigWheel
Generation V (Fig. 1A). Please make sure that the
®
angle of the click locks and the angle of the handlebars are the same. Also
be sure to place the light unit at the same height as the spacing between
the click locks and the handlebars.
7/24