Safety Recommendations; Technical Specifications - FONESTAR PAR-18L Mode D'emploi

SAFETY RECOMMENDATIONS

- Do not open the equipment under any circumstances.
- Make sure that the devices are at least 50 cm away from inflammable substances or elements.
- Do not look at the laser beams from a distance of less than 15 cm or for more than 10 seconds of direct
radiation, to avoid serious damage to eyes.
- Switch the equipment off for 15 minutes every 2 hours to avoid overheating.
- Do not continually switch the equipment on and off as this could decrease its useful life.
- Only use this equipment in covered and refrigerated spaces.
- Do not move or manipulate the equipment while it is connected to the mains and operating.
- Do not modify the lighting elements of the equipment without technical supervision or with material that
has not been guaranteed by the supplier.

TECHNICAL SPECIFICATIONS

CHARACTERISTICS
LED
DMX CHANNELS
INPUTS
OUTPUTS
CONTROLS
POWER SUPPLY
DIMENSIONS
ACCESSORIES
PAR-18L
Flat RGB PAR spotlight.
Automatic mode, static mode, sound activation and master/slave mode.
Colour, dimmer, strobe adjustment and speed adjustable via DMX control
console.
Microphone incorporated.
18 x 1 W, 6 R, 6 G, 6 B
7
DMX IN, 3-pin XLR
DMX OUT, 3-pin XLR
Configuration screen
100-240 V AC, 20 W
176 x 176 x 100 mm depth
Adjustable fixing mount
Remote control
- 5 -
EN