cleAninG And MAintenAnce
1. Take the plug from the wall socket.
2. Disassemble the device by following the steps described in the chapter "Assembling" in the ooposite
direction.
•
Clean the device after each use.
•
If you are experiencing difficulty in removing the grinding disc, place the flat edge of a spoon at
the edge between the grinding disc and the head. This way, you can tilt the grinding disc out of the
head.
3. Clean the parts in warm water with soap.
4. Clean the housing with a clean cloth moistened with a disinfectant cleaner, and dry thoroughly.
•
Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes)
to clean the device.
•
Do not immerse the motor unit in water, or in other liquids.
technicAl inforMAtion
Type:
Output:
Power supply:
the enVironMent
•
Dispose of packaging material, such as plastic and boxes, in the appropriate waste containers.
•
When this product reaches the end of its useful life do not dispose of it by putting it in a dustbin;
hand it in at a collection point for the reuse of electrical and electronic equipment. Please refer to
the symbols on the product, the user's instructions or the packaging.
•
The materials can be re-used as indicated. Your help in the re-use, recycling or other means of
making use of old electrical equipment will make an important contribution to the protection of the
environment.
•
Contact your municipality for the address of the appropriate collection point in your neighbourhood.
GuArAntee terMs
The importer guarantees the appliance against defects caused by manufacturing and/or material faults for
60 months from the date of purchase, subject to the following conditions.
1. No charges will be made for labour costs or materials during the warranty period. Any repairs carried
out during the warranty period do not extend the warranty period.
2. The importer automatically becomes the owner of any faulty parts that he replaces or a faulty
appliance (in the event of replacement of the appliance).
3. All claims submitted under warranty must be accompanied by the original bill of sale.
4. Claims under warranty must be submitted to the dealer where the appliance was purchased or to the
importer.
5. The warranty is issued solely to the first purchaser and cannot be transferred.
6. The warranty does not cover damage caused by:
a. Accidents, incorrect use, wear and/or neglect.
b. Faulty installation and/or use in a manner contravening the prevailing legal, technical or safety
regulations.
c. Connection to a mains voltage other than the voltage specified on the type plate.
d. Unauthorized modifications.
e. Repairs carried out by third parties.
f.
Careless transport, i.e. without suitable packaging materials or protection.
7. No claims may be made under this warranty for:
a. Losses incurred during transport.
b. The removal or changing of the appliance's serial number.
8. The guarantee does not cover power cords, lamps or glass parts.
9. No claims can be submitted under this warranty for damage other than the repair or replacement of
faulty parts. The importer can never be held responsible for any consequential loss or damage or any
other consequences, resulting either directly or indirectly from the appliance supplied by the importer.
AFDM1301
150W
230V ~ 50 Hz
24
user's instructions