Technical Description; Control Elements - Waeco Multi Gas Notice D'utilisation

Multi Gas
6

Technical description

The multi gas leak detector is equipped with a sensor.
The sensor detects leaks. Three LEDs indicate the presence of refrigerant
R-1234yf. Three LEDs indicate the presence of refrigerant R-134a, all other
HFC, HCFC, HFO and CFC gases and gas mixtures (SF6), as well as tracer
gas/forming gas (95/5 nitrogen/hydrogen).
Leaks are indicated by a beep with different pitches through a loudspeaker
An LED bar graph shows the size of the leak and ensures the precise location
of the leak. Four different levels of sensitivity can be set for each refrigerant.
6.1

Control elements

No. in
fig. 2,
Description
page 2
1 Loudspeaker
2 LED bar graph
3 Green LED
4 START button
5 Sensor tip
6 Metal probe
7 3 white LEDs
(L, M, S)
8 3 blue LEDs
(L, M, S)
EN
Explanation
Beep is emitted when a leak is detected.
This shows the size of the leak and ensures
the precise location of the leak can be found
quickly. The nearer or larger the leak is, the
more bars are shown.
 LED lights up: batteries are charged
 LED does not light up: batteries are charged
10 %
 switches the device on and off
 switches between the four sensitivity levels
–
–
indicate leaks with R-1234yf
indicate leaks with R-134a and all other gases
Technical description
.
17