Accessories; Environmental Protection - Metabo AG 18 Notice Originale

en ENGLISH
containing lead), mineral dust (from bricks,
concrete etc.), additives used for wood treatment
(chromate, wood preservatives), some wood types
(such as oak or beech dust), metals, asbestos.
The risk from exposure to such substances will
depend on how long the user or nearby persons are
being exposed.
Do not let particles enter the body.
Do the following to reduce exposure to these
substances: Ensure good ventilation of the
workplace and wear appropriate protective
equipment, such as respirators able to filter
microscopically small particles.
Observe the relevant guidelines for your material,
staff, application and place of application (e.g.
occupational health and safety regulations,
disposal).
5. Overview
See page 2.
1 Nozzle
2 Extension pipe
3 Exhaust port
4 Suction opening
5 Battery pack *
6 Thread for attaching the Metabo belt hook *
7 Capacity and signal indicator *
8 Capacity indicator button *
9 Battery pack release button
10 Handle
11 Trigger switch
12 Thumbwheel to set maximum air volume
* depending on equipment/not in scope of delivery
6. Commissioning
Battery pack
Charge the battery pack (5) before use.
If performance diminishes, recharge the battery
pack.
The ideal storage temperature is between 10°C and
30°C.
Li-Ion battery packs "Li-Power" have a capacity and
signal indicator (7):
- Press the button (8), the LEDs indicate the charge
level.
- If one LED is flashing, the battery pack is almost
flat and must be recharged.
Removing and inserting the battery pack
Removal: Press the battery pack release button (9)
and pull the battery pack (5) forwards.
Inserting: Slide in the battery pack (5) until it
engages.
7. Use
7.1 Attach nozzle and pipe
Prior to any conversion work: Remove battery
pack from machine.
8
Attach the pipe (2) and/or the nozzle (1) to the
exhaust port (3) and secure by turning it (bayonet
catch engages).
7.2 On/Off switch, setting the speed
Avoid switching on the machine accidentally:
always switch it off when the battery pack is
removed from the machine.
Switching on, speed: Press the trigger switch
(11). The air volume can be adjusted by pressing
the trigger switch.
Switching off: Release the trigger switch (11).
7.3 Setting maximum air volume
Set the maximum air volume using the thumbwheel
(12).

8. Accessories

Use only genuine Metabo accessories.
Use only accessories which fulfil the requirements
and specifications listed in these operating
instructions.
Fit accessories securely. If the machine is operated
in a holder: Secure the machine well. Loss of control
can cause personal injury.
A Chargers: ASC Ultra, ASC 15, ASC 30 and others
B Battery packs with different capacities. Use
battery packs only with voltage suitable for your
power tool.
See www.metabo.com or the catalogue for a
complete range of accessories.
9. Repairs
Repairs to electrical tools must ONLY be
carried out by qualified electricians!
Contact your local Metabo representative if you
have Metabo power tools requiring repairs. See
www.metabo.com for addresses.
You can download a list of spare parts from
www.metabo.com.

10. Environmental Protection

Observe national regulations on environmentally
compatible disposal and on the recycling of disused
machines, packaging and accessories.
Only for EU countries: Never dispose of
power tools in your household waste! Used
power tools must be collected separately and
handed in for environmentally compatible recycling
in accordance with European Directive 2002/96/EC
on waste electrical and electronic equipment and its
implementation in national legal systems.
Battery packs may not be disposed of with regular
waste. Return faulty or used battery packs to your
Metabo dealer!
Do not allow battery packs to come into contact with
water!